Leak Detection

products / leak detection

Leak Detection

Coner adipiscin ig elitdmye oi irues nonu mmy nihnei. Coner adipiscin ig elitdmye oi irues nonu mmy nihnei.

A Water Leak Detection System installed in vulnerable areas will continuously monitor potential hazards. 

Air conditioning, sprinkler system, water colled processors and heating systems are all potential sources of water leakage which if undetected can seriously damage today's complex electrical, communication and computer networks; even a small leak can prove disastrous.

The waterleak system has an attractive and unobtrusive control panel containing the alarm circuitry and power supply. The point detection probes and continuous cables are connected to the control panel via a simple two core leader cable making installation quick and inexpensive. The alarm maybe extended to a remote location by extension sounder/indicator units. Disconnection of probes or a break in the wire is immediately indiacted on the control panel by the line fault indicator. This ensures the integrity of the system can not be compromised without a warning.

System Overview

  • A Hydrosense Water Detection system installed in vulnerable areas will continuously monitor the potential hazards around the clock, year in year out
  • The Hydrosense system has a range of attractive and unobtrusive control panels containing the alarm circuitry, power supply and has the facility for 24 hour battery standby
  • A Hydrosense system has two methods of leak or moisture detection, Linear or Point detection
  • Linear detection is provided by Hydrowire moisture sensitive cables which are connected to the control panel via a special connection box, by simple two core leader cable making installation quick and inexpensive
  • Point detection is provided by Floor or Drop Tray Probes also connected to the control panel by simple two core leader cable
  • The Hydrowire and Probes are continuously monitored. Any disconnection or failt is immediately indicated on the control panel. All monitoring indicators can be repeated to repeater panels or via free contacts to a BMS

Floor and Drip Mounting Probe

The floor probe is simply fixed to the floor and adjusted to give the required detection level to the control panel via a simple junction box. The drip tray probe has exactly the same facilities as the floor mounting probe but has a bracket for mounting onto the side of an ACU drip tray

Wire Detector

Available in 5 and 10 metre lengths, sensing wire is a flexible cable which will continuously monitor large areas. Even when a small amount of water comes into contact with it, it is absorbed by capillary action thereby triggering an alarm. After the source of the leak has been removed, the wire will dry out in around 20 minutes for use again. Longer runs can be made by simply plugging lengths of wires together. Special lengths can be made to order. 

Benefits:

  • Auxiliary alarm contacts
  • Monitored alarm outputs
  • Open and shirt circuit line monitoring
  • Simple controls
  • Zonal repeat contacts
  • Easy to install, service and maintain
  • Bright dual LED's
  • Clean low profile appearance
  • Diagnostic fault LED's lockable enclosure
  • Special colours and finishes available